BigSpring 6200
60 Gallon Capacity
For cleaner water, neckrail required to prevent cattle from standing in the water.
10″ to 12″ stem wall recommended.
• Designed for free stall barns
• Flat back design for flush fit with wall or panel
• Center between stalls
• No wrenches required for valve compartment access
• Rubber gasket for air-tight dome seal
• Three access panels
• Two large 3” drains; severe slope for quick draining
• Optional gravity fill assembly available
• Stainless steel anchor bolts included
DOWNLOAD THE INSTALLATION GUIDE HERE
| CAPACITY | 100 head dairy 200 head beef |
|---|---|
| GALLONS | 60 (227 liters) |
| LENGTH | 84” (213 cm) |
| WIDTH | 22” (56 cm) |
| DRINKING HEIGHT | 22” (56 cm) |
| WEIGHT | 170 pounds (77 kg) |
| HEAT | 500 watt heater (optional) (110 or 220 volt) |
Related products
-
MiraFount 3390
MiraFount 3390
- Polyethylene construction
- No sharp edges
- Tough high-impact resistant “Rockite” material
- Stands up to livestock abuse
- Resistant to corrosion
- 5 year warranty
- Patented Miraco roll-away ball closures
- Extra insulation above the valve area
- Removable dome for quick and easy access to valve area
- 2″ to 3″ (5 to 8cm) urethane insulation
- Molded base unit anchors (stainless steel anchor bolts included)
- Sealed bottoms
- Sloped bottoms for easier cleaning – a MiraFount exclusive
Removable top end panels help get new cattle started fast or when you need more capacity for a few extra head.
Cattle love the roll-away ball feature. Nothing in their face while drinking, unlike the competition’s design where they have the disc constantly in their face.
When you see the blue balls up you know you have water, even from a distance.
DOWNLOAD INSTALLATION GUIDE HERE
CAPACITY 150 head beef
60 head dairyGALLONS 44 (166.5 liters) SPECIFICATIONS Two 10” openings / 10.75” ball closures (convertible) DIMENSIONS 43” x 29” x 20” (109 x 73.6 x 51 cm) WEIGHT 126 pounds (57 kg) DRINKING HEIGHT 20” (51 cm) Quick View -
E-Fount 3330-E
E-Fount 3330-E
E-Fount Waterers with Heat for Beef, Dairy Cattle or General Livestock
- Polyethylene construction
- No sharp edges
- Tough high-impact resistant “Rockite” material
- Stands up to livestock abuse
- Resistant to corrosion
- 5 year warranty
- Patented Miraco roll-away ball closures
- Extra insulation above the valve area
- Removable dome for quick and easy access to valve area
- 2″ to 3″ (5 to 8cm) urethane insulation
- Molded base unit anchors (stainless steel anchor bolts included)
- Sealed bottoms
- Sloped bottoms for easier cleaning – an E-Fount exclusive
Cattle love the roll-away ball feature. Nothing in their face while drinking, unlike the competition’s design where they have the disc constantly in their face.
When you see the blue balls up you know you have water, even from a distance.
- All E-Founts are equipped with a 75 watt heat element and thermostat.
- E-Founts are the most economical electric heat waterers available today.
- E-Founts only require 4 kilowatts of electricity during a week of -25 F temperatures.
DOWNLOAD INSTALLATION GUIDE HERE
CAPACITY 50 head beef
25 head dairyGALLONS 15 (57 liters) SPECIFICATIONS One 8.75” opening / 9” ball closure DIMENSIONS 28” x 26” x 14” tall (71 x 66 x 36 cm) WEIGHT 57 pounds (26 kg) HEAT ELEMENT 75 watts Quick View -
LilSpring 3200
LilSpring 3200
25 Gallon Capacity
• Large access panel for easy access to valve area
• 3” (8 cm) offset drain
• Access panels at both ends
• Installs easily on most existing concrete pads
• Spring load clips allow entry to valve area – no wrenches required
• Constant flow available
• Stainless steel anchor bolts includedDOWNLOAD THE INSTALLATION GUIDE HERE
CAPACITY 150 head beef
75 head dairyGALLONS 25 (95 liters) DIMENSIONS 48” x 24” x 29” (122 x 61 x 74 cm) DRINKING HEIGHT 24” (61 cm) VALVE Miraco automatic plastic WEIGHT 98 pounds (45 kg) HEAT Optional 250 and 500 watt submersible heater Quick View
